Leak Detection Brooklyn
Hidden leaks found with thermal imaging, acoustic tools and pressure testing. Serving every street in Brooklyn, about 10 km west of the CBD, day and night.
- Licensed & insured
- Fixed upfront prices
- 24/7, no call centre
What's usually behind it in Brooklyn
We find a lot of Brooklyn leaks where old pipes were joined to new ones during renovations, often hidden behind tiled walls.
A high water bill or a damp patch with no obvious cause usually means a hidden leak in a wall, under a slab or in the yard. We use thermal cameras, acoustic listening gear and pressure tests to pin it down before opening anything up.
Much of Brooklyn was built between the wars and in the 1950s, so earthenware sewers and ageing copper lines are common. We also look after the shops, workshops and warehouses in Brooklyn.
When to call
- A water bill much higher than usual
- The water meter moving with all taps off
- Damp patches, bubbling paint or mould
- The sound of running water when nothing is on
- Warm spots on the floor (a hot water leak)
Leak Detection work we do in Brooklyn
- Water meter testing
- Thermal imaging
- Acoustic leak detection
- Under-slab leaks
- Shower and wall leaks
- Pool and irrigation leaks
- Leak reports for insurance
- Pipe repair after detection
How a Brooklyn job runs
Confirm
We check the meter to confirm there's a leak and estimate how much water is being lost.
Isolate
We isolate sections of the system to narrow down where it is.
Pinpoint
Thermal and acoustic tools locate the leak so we only open up what's needed.
Repair
We repair the leak and can provide a written report for your insurer or water authority.
Around Brooklyn
From one side of Brooklyn to the other, and across the border into Tottenham, South Kingsville and Altona North, we cover it all.
Brooklyn is in the City of Brimbank, about 10 km west of the CBD, in Melbourne's western suburbs.
- Postcode
- 3012
- Council
- City of Brimbank
- Housing
- Interwar brick and californian bungalows
- Area
- Western Suburbs
Other services in Brooklyn
Leak Detection in Brooklyn: common questions
Can you find a leak without breaking walls?
Usually, yes. Thermal and acoustic tools let us pinpoint the leak, so we only open the small area needed.
Will I get a report for insurance?
Yes. We can provide a written leak report with photos for your insurer.
Can I get a rebate on my water bill?
Water authorities may offer a leak allowance once the leak is repaired. Our report helps with that claim.
How do I check for a leak myself?
Turn off every tap, note the water meter reading, wait 30 minutes without using water and check again. If it moved, call us.